Pre-Melting Pots
Pre-Melting Pots are available in both channel and coreless versions. These may be used for alloying including Alu-Zinc alloys. Pre-Melting Pots help to minimize the dross that can otherwise build-up in the main coating pot. Launder options are available for transferring molten metal at the proper temperature from a Pre-Melting Pot to the main Coating Pot and offer other benefits.
LEARN MORE
Pre-Melting Pots are primarily used to replenish the main coating pot. These are important with a channel-type coating pot installation because the clog-causing dross created during the melting of ingots occurs in the pre-melt pot and not during the coating process. This allows for:
- Minimized wear or clogging of the channel during operation
- Minimized temperature variations in the main pot usually caused by ingot insertion
- Better quality product and less dross accumulation in the coating pot
Launder options are available for transferring molten metal at the proper temperature from a Pre-Melting Pot to the main Coating Pot and offer the following benefits:
- Minimize oxidation of the alloy
- Can be heated by either gas burners or an electrical system mounted to the optional insulated launder cover
- Are available as either overflow (angled) or flooded (level)
Features
| Standard Features | Optional Features |
|---|---|
| Air-Cooled Twin Loop Inductors up to 500 Kilowatts | Covered Gas and Electric Heated Launders |
| Water-Cooled Twin Loop Inductors up to 750 Kilowatts | Covered Gas and Electric Heated Launders |
| Hybrid Water and Air-cooled Inductors up to 500 Kilowatts | Charging Covers |
| Coreless Type |
Tech Specs
| Capacities | Factory Tested |
|---|---|
| Click here to contact Inductotherm for Custom Solutions | Critical Components |
Literature
